Skip to content

Buyer's guide

Why Melbourne houses crack: reactive clay

Much of Melbourne sits on reactive clay. Clay swells when it takes on water and shrinks when it dries out, so the ground under a house moves with the seasons. What that movement means depends on how the house was built.

  • Independent Reports
  • Australian Standards
  • Fast Reports

How movement shows up

Three house types, three behaviours

That movement shows up differently depending on what the house is made of and when it was built.

Older timber houses on stumps
Common through Northcote, Brunswick, Preston and Footscray, these tend to move unevenly. Stumps settle at different rates, floors slope, and doors stop closing. Restumping history matters, and we look for it.
Slab-on-ground houses
Most of what was built in Point Cook, Tarneit, Werribee, Craigieburn and Clyde since the mid-2000s. The slab can lift at the edges or sag in the middle, showing as stair-step cracking in brickwork, gaps above windows, and doors that bind in one season and not another.
Brick veneer from the 1960s–70s
Fills the eastern and south-eastern suburbs, and sits somewhere between the two in how it moves.

A crack on its own tells you very little. What matters is where it is, which way it runs, how wide it is, whether it goes through the mortar or the brick, and whether anything else in the house agrees with it. A hairline crack above a window with every door still swinging freely is usually nothing. A 5mm stair-step crack with a door binding at the top corner is a different conversation. That judgement is what you are paying for.

Get a read on the cracks that matter

We assess movement in the context of the whole house, not a single crack in isolation.

  • Independent Reports
  • Fast Reports