Pest Inspection
Find timber pests before they find your investment.
A targeted inspection for termites and other timber pests across accessible areas, identifying active infestation, damage and conditions conducive to attack.
- Independent Reports
- Australian Standards
- Fast Reports
What's included
Termite and timber-pest detection
Conducive-conditions assessment
Guidance on management and prevention
Carried out in line with AS 3660.
Questions about this inspection
What does a pest inspection detect?
A timber pest inspection, carried out to AS 4349.3, identifies active timber pests such as subterranean termites, along with borers and wood decay fungi where they are present. It looks for evidence of past activity, the damage that results in accessible areas, and the conditions that make a property attractive to pests — things like damp subfloors, poor drainage and timber in contact with the soil. Like any visual inspection it is limited to areas that can be reasonably accessed, so concealed activity may not be visible; any access limitations are recorded in the report.
What pests are checked in a timber pest inspection?
A timber pest inspection focuses on the pests that damage building timbers: subterranean termites, borers (wood-boring insects) and wood decay fungi. It also looks for conditions that attract them, such as damp subfloors, poor drainage, and timber in contact with soil. General household pests like ants, spiders or rodents fall outside the scope unless they signal a conducive condition. The aim is to find timber-destroying organisms and the environments that invite them, rather than to survey every insect on the property.
Can termites always be detected?
No inspection can guarantee every termite is found. A timber pest inspection to AS 4349.3 is a visual check of accessible areas, and termites can remain hidden inside walls or under finishes with no surface evidence on the day. Inspectors use moisture meters and sounding to improve detection, since damp and hollow timber are strong indicators, but concealed activity behind solid surfaces can go unseen. The report records areas that could not be accessed, and further investigation can be arranged where there is reason for concern.
Does a pest inspection include roof voids?
Where there is safe and reasonable access, the roof void is inspected, as it is a common place to find termite workings, damaged timbers and moisture entry. The inspector also checks the subfloor, interior, exterior and the garden where relevant, since termites often approach from fences, stumps or garden beds. Confined, unsafe or sealed roof spaces may not be fully accessible; any such limitation is noted in the report so you know which areas were and were not examined.
Can previous termite damage be identified?
Often, yes. Inspectors look for signs of past activity such as mud tunnelling, damaged or hollowed timber, and old workings, and will report these alongside any live activity. However, distinguishing old damage from current activity, and judging its full extent, can be difficult when it is concealed within a structure. The report describes what is visible and may recommend further investigation where the significance of past damage cannot be established by visual inspection alone.
Is treatment included in a pest inspection?
No. An inspection and a treatment are separate things. A timber pest inspection is an independent assessment that reports on what was found; it does not include spraying, baiting or termite management work. Keeping them separate matters, because an inspector who has no stake in selling a treatment can report objectively. If active termites or a conducive situation are found, the report will note them and you can then engage a licensed pest manager to advise on and carry out any treatment.
How often should a pest inspection be completed?
For occupied homes, a common recommendation is a timber pest inspection at least once a year, and more frequently in areas of higher termite pressure. Termites can establish and cause significant damage between inspections, so regular checks help catch activity early. Annual inspections are separate from the one you would obtain before buying a property. Your inspector can suggest a sensible interval based on the construction type, the surrounding environment and any history of activity at the property.
Book your pest inspection
Licensed Melbourne inspectors, clear reports, fast turnaround.
- Independent Reports
- Fast Reports